Honeywell BW Icon Portable Multi Gas Detector

Stock Status - Special Order on the supplier.

The BW™ Icon multi gas detector for H2S / CO / O2 / LEL / SO2 provides ongoing protection for 2 years with no need to replace the sensors or battery. This multi-sensor gas monitor has been named for its display of simple icons for gas levels and device status. There are no live gas readings for workers to interpret and no time-consuming training, when there’s a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. 

PORTABLE / EASY TO USE / RELIABLE

CO | H2S | O2 | NDIR-CH4 | SO2

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display?

Need to report a gas alarm?

Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data - all organised in a report that’s ready to send.

• 2 year fixed life gas monitor
• Small, lightweight & wearable 
• One button operation
• Compatible with Honeywell's TouchConnect via Bluetooth
• 2-month battery run time from a full charge 

Reliable

• 2 months of battery runtime on a 4.5-hour charge — and up to 4 months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime
• No service required, activate and use for two years
• Bluetooth is included for ease of downloading and sending reports via the Safety Suite App

Easy to use

• Small, lightweight, and wearable
• One-button operation

Easy to manage

• IntelliFlash™ green light indicates the detector is in compliance; amber light indicates the need for maintenance
• Compatible with IntelliDoX instrument management system and Honeywell Safety Suite
• Compatible with TouchConnect, using Bluetooth® for wireless configuration
• Monitoring four gases - oxygen (O2), hydrogen sulphide (H2S), combustible gas (LEL), and your choice of either carbon monoxide (CO) or sulphur dioxide (SO2)

Benefits & Features

Features & Benefits of the BW Icon

RELIABLE   Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.

COMPATIBLE   The Honeywell BW™ Icon is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.

ACCURATE   Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.

EASY TO MANAGE   The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.

RESPONSIVE   1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.

EASY TO USE   Small, lightweight and wearable. One-button operation.

 

Icon Specifications

BW Icon Specifications

Size	108.2 mm x 61.5 mm x 43.2 mm with Alligator Clip 108.2 mm x 61.5 mm x 37.8 mm with Klick Fast Stud
Weight	185 g (6.5 oz) with Alligator Clip, 169 g (6 oz) with Klick Fast Stud
Temperature	-40°C to 60°C
Working Humidity	5% to 95%
Ingress Protection	IP66, IP68
Alarms	Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, Negative Drift, Over Limit, Multi-alarm
Self Test	Perform diagnostic of the sensor, circuitry on activation; Activated detector automatically performs analog sensor diagnostic every 10 minutes, digital sensor diagnostic every second
Typical Battery Life	Two months (with NDIR CH4 sensor)
Connected Worker	Bluetooth® Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App, Device Configurator App, and Safety Suite Device Configurator Software
User Options	Change High, Low, TWA and STEL alarm set points Latching alarms Set Calibration and/or bump test reminders Assign worker and location assignments Always on User options only available via Device Configurator and Safety Suite Device Configurator
Warranty	Two-year warranty for sensors and detector
Certificates & Approvals	ATEX, IEC Ex, contains FCCID, contains IC

 

Icon Sensor Specifications

BW™ Icon Sensor Specifications

CO	Measuring Range: 0 to 2000ppm Resolution: 1ppm Working Temperature: -40°C to 60°C
H2S	Measuring Range: 0 to 200ppm Resolution: 1ppm (can set to 0.1ppm) Working Temperature: -40°C to 60°C
SO2	Measuring Range: 0 to 150ppm Resolution: 0.1ppm Working Temperature: -20°C to 50°C intermittent -40°C to 55°C
O2	Measuring Range: 0 to 30% VOL Resolution: 0.1% VOL Working Temperature: -40°C to 60°C
NDIR-CH4	Measuring Range: 0 to 100% LEL Resolution: 1% LEL Working Temperature: -40°C to 60°C

Caution: The infrared LEL sensor used in Honeywell BW™ Icon cannot detect hydrogen and acetylene. For applications involving these combustible gases, consider a catalytic-bead LEL sensor as found in the Honeywell BW™ MicroClip Series. 

Downloads

Download the Honeywell Safety Device Configurator for use with your BW^TM Icon

Device Configurator Mobile App- The Honeywell device configurator app provides the experience of managing safety (gas detectors) instruments on a mobile platform. It simplifies interaction with both portable and transportable gas detectors when they are in close proximity. It also provides the flexibility and convenience to access information stored on instruments without having to move them

With the Honeywell Device Configurator app, you can:

• Download data log from instruments
• Manage device configuration
• Filter and review alarm events and summary
• Email data in standard CSV format
• Upload instrument data into remote monitoring software
• Firmware update for supported instrument

 

Special Order Information

BW Icon Special Order

 

When you see 'Special Order' products available for purchase on our website it means they will be sourced on-demand from our suppliers when you place your order. Products typically have this status when the product is not actively stocked within our warehouse but is available to order.

 

This may be due to the shelf life or the specialty nature of some of our products (ie: gas detection and specialty gases) or the need to custom manufacture a product to fit/suit the application.

 

Once we have received your order and payment confirmation we will place an order with the Supplier.

 

Gas Detectors / Specialty gases (ie: short shelf-life products) - may take up to 4 weeks (please note this can vary per supplier availability and manufacturing schedules) to be receipted into our store. You will receive an estimated date of shipping once we have received confirmation from our Supplier.

 

Custom Manufacturing - for items that require custom manufacturing you will receive an estimated date of shipping once we have received confirmation from our Supplier.

From time to time a supplier may not be able to supply in the time indicated, and items are placed on backorder. If it appears that your order will not be dispatched on time, you will be informed as soon as possible. You will be offered the opportunity to cancel your order at that time, otherwise, your order will be dispatched as soon as the items are available.